Cast iron stove with steam generator box and soapstone cladding
For sauna rooms up to 25m3
SUMMIT weights 2-3 times more than an ordinary sauna heater. It is a huge heat accumulator not only for practically endless steam, but also retaining the heat for drying the sauna room.
This model includes minimalist design soap stone cladding with open bottom layer for air flow.
The extra-heavy stone tray generates a large amount of soft low-dispersion steam. It is practically non-pourable.
The EXTENDED series with a steam generator box makes it even easier to get the right 60/60 humidity/temperature ratio. Ordinary sauna heaters cannot obtain humidity with such temparature.
The soapstone cladding blocks convection and infrared radiation. The sauna room does not overheat and the heat is as pleasant as from traditional tile stoves.
Double combustion chamber: twice less firewood, protected chimney.
There are no welding points for cast iron elements, the walls thickness is 10-12mm.
Large panoramic door glass.
Possibility to heat the water.
Ready to use in 1-1,5 hours.
The service life of the sauna stove is approximately 30 years.
60 years of experience in cast iron casting.
Quality control from manufacturing to assembly.
5-year warranty and fast technical service.
|Size of sauna room
|<25 m 3
|sauna stove with soap stone cladding
|Sauna stove type
|Length of firewood
|Dimensions of sauna stove (length x width x height)
|340 x 640 x 850 mm
|Sauna stove material
|Sauna stove weight
|The material of steam generator box
|Weight of steam generator box
|Soapstone cladding material
|Measurements of soapstone cladding (length x width x height)
|560 x 640 x 930 mm
|Soapstone cladding weight
|Dimension of door panel (length x width x height)
|500 x 90 x 550 mm
|Door glass size (width x height)
|315 x 252 mm
|Stones in a steam generator box
Accessories that can be purchased additionally:
Heat-retaining stones in a steam generator box – jadeite. The recommended fraction of sauna stones is 5-7 cm on the bottom layer, 7-10cm in the niddle layer and 10-15cm on the top.
Additional portal extension – 93mm.
Soapstone cladding for the chimney – 300mm; 600mm; 900mm height.